A.PVST+reduces the CPU cycles for all the switches in the network
B.PVST+automatically selects the root bridge location,to provide optimized bandwidth usage.
C.PVST+allow the root switch location to be optimized per vlan.
D.PVST+supports Layer 3 load balancing without loops.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. What switch proves the spanning-tree designated port role for the network segment that services the printers?（）
A.Switch1
B.Switch2
C.Switch3
D.Switch4
Refer to the exhibit.The network administrator normally establishes a telnet session with the switch from host A.However,host A is unavailable.The administrator′s attempt to the switch from host B fails,but pings to the other two hosts are successful.what is the issue?（）
A.Host B and the switch need to be in the same subnet.
B.The switch needs and appropriate default gateway assigned.
C.The switch interface connected to the router is down.
D.Host B need to be assigned an IP address in vlan 1.
E.The switch interfaces need the appropriate IP addresses assigned.
A.it is a layer 2 messaging protocol which maintains vlan configurations across network.
B.it includes an 8-bit field which specifies the priority of a frame.
C.it is used exclusively for tagging vlan frames and dose not address network reconvergence following switched network topology changes.
D.it modifies the 802.3 frame header,and thus requires that the FCS be recomputed.
E.it is a trunking protocol capable of carring untagged frames.
Based on the network shown in the graphic which option contains the potential networking problem and protocol or setting that can to prevent the problem?（）
A.Routing loops, hold down timers
B.Switching loops, split horizon
C.Routing loops, split horizon
D.Switching loops, VTP
E.Routing loops, STP
F.Switching loops, STP
A.ping address
B.tracert address
C.traceroute address
D.arp address
最新試題
In a GLBP network, who is responsible for the arp request?（）
Which three features are added in SNMPv3 over SNMPv2 ? （）
What are the benefit of using Netflow?（）
What parameter can be different on ports within an EtherChannel?（）
What are two enhancements that OSPFv3 supports over OSPFv2? （）
What are the three things that the Netflow uses to consider the traffic to be in a same flow ?（）
What are three factors a network administrator must consider before implementing Netflow in the network?（）
What command instructs the device to timestamp Syslog debug messages in milliseconds?（）
What level will be trapped if the administrator executes the command ？（）
Refer to the exhibit.If the router Cisco returns the given output and has not had its router ID set manually, what value will OSPF use as its router ID?（）