A. SDH circuit over a SONET network delivering it as an SDH signal
B. SDH circuit over a SONET network delivering it as a SONET signal
C. SONET circuit over an SDH network delivering it as an SDH signal
D. SONET circuit over an SDH network delivering it as a SONET signal
您可能感興趣的試卷
你可能感興趣的試題
A. trunking
B. squelching
C. nodal bypass
D. bridge and roll
E. node failure insertion
A. Traffic is switched from the first node receiving the AIS indication.
B. Traffic is switched from the far side of the failure, allowing handshaking to occur.
C. UPSR traffic is switched from the terminating node, BLSR traffic is rerouted from the originating node in the ring.
D. UPSR traffic is switched from the terminating node, circuit by circuit. BLSR traffic is rerouted from the last reachable node in the ring.
A. Each fiber has half of its SONET capacity reserved for protection.
B. Two fibers in the span carry working traffic, while the other two fibers in the span are reserved for protection.
C. The signal is sent simultaneously in both directions around the ring. The receiver determines which fiber to listen to based on signal quality.
D. The signal is sent simultaneously in both directions around the ring. The transmitter determines which fiber has the working bit set for the receiver to acknowledge.
A. DS-1; E1
B. DS-1; STM-1
C. OC-3; STM-1
D. STS-1; STM-1
E. OC-192; STM-192
A.AMI
B.ESF
C.DUS
D.SSM
E.B3ZS
F.B8ZS
A.DUS
B.line timing
C.loop timing
D.internal timing
E.through timing
A. ESF
B. PRS
C. DUS
D. SMC
E. B8ZS
A. J0 errors detected in a specified interval
B. errors detected in a given Errored Second (ES)
C. errors detected in a given Severely Errored Second (SES)
D. errors the encryption algorithm detects in a specified interval
E. Bit Interleaved Parity (BIP) errors detected in a specified interval
A. prevent the leakage of external fiber emissions
B. provide the optical network with the highest level of security possible
C. assure an even distribution of 1's and 0's for extended transmitter life
D. assure an adequate number of transitions for clock recovery at the receiver
E. prevent the receiver from assuming AIS inadvertently when all 0's are received
A. fibers are terminated incorrectly on a node
B. the channel number in the received K1 byte is not identical to the channel number transmitted in the K2 byte
C. the channel number in the received C1 byte is not identical to the channel number transmitted in the C2 byte
D. the channel number in the received C2 byte is not identical to the channel number transmitted in the C1 byte
E. the channel number in the received K2 byte is not identical to the channel number transmitted in the K1 byte
最新試題
How is UPSR and BLSR traffic rerouted during a protection switch when a complete fiber cable cut occurs?（）
SONET Path Terminating Equipment (PTE) requires which three line codes to be supported for DS1 and DS3 circuits?（） (Choose three.)
The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?（）
What is an advantage of an externally modulated laser over a directly modulated laser?（）
What are three relevant design considerations when using the 15216 EDFA? （）(Choose three.)
What is the phenomenon called where different wavelengths of light travel at different speeds?（）
In order to avoid misconnections due to a failed node in a Bidirectional Line Switched Ring (BLSR), Alarm Indication Signals (AISs) are sent on every channel normally terminating in that node. What is the name of this process?（）
What is the difference between the transmitted power and the sensitivity of the receiver?（）
The dispersion of a non-zero dispersion shifted fiber is 6 ps/nm*km at 1550 nm and 10 ps/nm*km at 1610 nm. What is the minimum dispersion compensation required if an L-Band DWDM signal travels through 200 km of fiber and has a dispersion tolerance of 1800 ps/nm?（）
Click the Exhibit button. Given the following parameters: transmitter output (min): -2 dBm receiver input (min): -28 dBm 15216 Mux and Demux loss: 4.5 dB 16 channels maximum In which sites shown in the exhibit could the 15216 EDFAs be placed to minimize the number of EDFAs needed?（）