單項選擇題

What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?（）

A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?（）

A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254

2.單項選擇題You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into the router locally using a terminal emulation program such as HyperTerminal.（）

A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.

3.單項選擇題After the show ip route command has been entered, the following routes are displayed. Which route will not be entered into the routing table of a neighboring router?（）

A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0

4.單項選擇題What is the purpose of this command? ip route 0.0.0.0 0.0.0.0 serial0/0（）

A. It configures a router to send all packets out interface serial 0/0.
B. It configures a router to block routing updates from being sent out interface serial 0/0.
C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0.
D. It configures a router to send all packets for unknown destination networks out interface serial 0/0.
E. It configures a router to drop all packets for which the destination network is unknown.

5.單項選擇題What is the purpose of the command shown below?vtp password Fl0r1da（）

A. It is used to validate the sources of VTP advertisements sent between switches.
B. It is used to access the VTP server to make changes to the VTP configuration.
C. It allows two VTP servers to exist in the same domain, each configured with different passwords.
D. It is the password required when promoting a switch from VTP client mode to VTP server mode.
E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.