A.IP Helper is used to direct BOOTP clients to a BOOTP server
B.IP Helper is used to prevent the router form forwarding IP broadcasts
C.IP Helper is used to allow IPX clients to communicate with IP-based servers
D.IP Helper is used to accommodate compatibility routers using different IP routing protocols
E.None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
RIP and OSPF are configured on the routers as shown in the exhibit. R2 is configured with a two-way redistribution between RIP and OSPF domains. All routers can ping each other， but R1cannot see any of the OSPF routes in its routing table. What could the problem be？（）
A.OSPF and RIP use the same major network 172.16.0.0. Therefore， the keywordsubnets is notrequired to redistribute protocols into OSPF
B.Because OSPF has a longer mask for the same major network than RIP and because RIPversion 1 is being used， none of the routes learned from OSPF will be advertised into RIP
C.The metric for the OSPF routes that are redistributed into RIP is too low， a fact that preventsOSPF routes from being advertised into RIP
D.The process of redistribution of RIP into OSPF does not require any metric conversion， so thereis no need to define the metric using the default-metric command during the redistribution
Refer to the network shown below：
R1 and R2 belong to the RIP routing domain that includes the networks 10.20.0.0/16 and
10.21.0.0/16. R3 and R4 are performing two-way route redistribution between OSPF and RIP. Anetwork administrator has discovered that R2 is receiving OSPF routes for the networks
10.20.0.0/16 and 10.21.0.0/16 and a routing loop has occurred. Which action will correct thisproblem？（）
A.Set the OSPF default metric to 20
B.Apply an inbound ACL to the R2 serial interface
C.Configure distribute-lists on R3 and R4
D.Change the RIP administrative distance on R3 to 110
E.Change the OSPF administrative distance on R3 to 110
F.None of the other alternatives apply
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated inthe exhibit. Given the partial configuration of router R2， which network will be present in the routingtable of R4？（）
A.Network B
B.Network A and Network B
C.Network A
D.neither Network A nor Network B
Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes areredistributed into the OSPF domain. A second redistribution is configured on router R2 using aroute map. Based on the configuration on router R2， which EIGRP external routes will be presentin the routing table of R1？（）
A.There will be no EIGRP external routes in the routing table of R1
B.The routes originating from the RIP routing domain
C.Only routes originating in the OSPF routing domain
D.All routes originating from RIP and OSPF routing domains
E.None of the other alternatives apply
A.00-00-0c-c0-05-0a
B.00-00-0c-cl-05-0a
C.01-00-5e-00-00-0c
D.01-00-5e-41-05-0a
E.00-00-0c-01-00-5e
F.01-00-5e-cl-05-0a
最新試題
Which statement about PPPoA configuration is correct？（）
Study the exhibit carefully.Routers A and B are customer routers. Routers 1， 2， 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true？（）
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
Router NetworkTut is configured as shown below：Given the above configuration， which statement is true？（）
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Match the xDSL type on the above to the most appropriate implementation on the below.
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.