A.qos-group
B.DSCP
C.LFI
D.NBAR
您可能感興趣的試卷
你可能感興趣的試題
A.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
B.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
C.A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
D.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
E.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
A.Both RTA and RTB will do LSA7/5 translation，since they are both NSSA ABRs
B.RTA will do LSA7/5 translation，since it has the lower router ID
C.RTB will do LSA7/5 translation，since it has the higher router ID
D.The redistributing router will do LSA7/5 translation，since it is within the NSSA
A.It enables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
B.It disables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
C.It enables the exchange of the "VRF-Lite" capability when the OSPF adjacency is formed.
D.It disables the MPLS processing on the OSPF learned routes inside the VRF
A.OSPF external LSAs are automatically flooded into all OSPF areas, unlike type 7 LSAs, which require that redistribution be configured.
B.External LSAs (type 5) are automatically changed to type 1 LSAs at ASBRs.
C.Type 5 LSAs are route summaries describing routes to networks outside the OSPF Autonomous System.
D.External network LSAs (type 5) redistributed from other routing protocols into OSPF are not permitted to flood into a stub area
A.Before sending traffic, it must first join multicast group 239.1.1.1 by sending an IGMPv2 membership report to the default router on the local subnet.
B.It must send an IGMPv2 Request to Send packet and then wait for an IGMPv2 Clear to Send packet from the IGMPv2 querier router on the local subnet
C.It may begin transmitting multicast traffic to the group only when there is no other host transmitting to the group on the local subnet.
D.It may transmit multicast traffic to the group at any time.
最新試題
Which one of the following potential issues is eliminated by using split horizon？（）
Which QoS mechanism can help classify different kinds of Citrix traffic （print job versus real-time terminal control）？（）
What does a unicast prefix-based IPv6 multicast address start with？（）
You are the network administrator of a Layer 3 switched network. Users in one VLAN are complaining that access to the server VLAN is very slow from time to time. Traffic in the local VLAN works without any issue， and users in other VLANs do not have any complaint to reach the server VLAN. What is most likely the cause of this issue？（）
Multicast is being deployed in the network， and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast， the network monitoring tools show periodic spikes in link utilization throughout the network， even in areas where the video application is not being used. What could be a possible cause？（）
Which IOS security feature is configured by the ip inspect inspection-name {in out} command？（）
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured， which parameter determines the winner？（）
For the following items，what is the mathematical relationship between the committed information rate （CIR）， committed burst （Bc）， and committed rate measurement interval （Tc）？（）
An administrator of a peer-to-peer server application reports that the maximum bandwidth that his application receives is 90 Mb/s. You have an 8-port，100-Mb/s EtherChannel bundle on the switching infrastructure between the two servers， resulting in a bidirectional throughput of more than what is recorded. Which two solutions would allow for more bandwidth for the application？（）
Which statement best describes OSPF external LSAs （type 5）？（）