A. name
B. best-effort
C. burst
D. rate
E. host control
您可能感興趣的試卷
你可能感興趣的試題
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled， all BIOS settings for the server are erased.
B. If disk scrub is enabled， all the data access on any local drives is destroyed.
C. If disk scrub is enabled， the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled， all data on any local drives is preserved， including the local storage configuration.
E. If disk scrub is enabled， all data on any local drives is preserved， including the local storage configuration.
A. Power capping helps mainly in reducing data center footprint.
B. Power capping helps reduce data center cooling.
C. A single power cap group policy allows you to set power limits across multiple UCS domains.
D. You can have multiple power cap groups per UCS domain.
E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.
A. from 10：00：00：00：00：00：00：00 to 10：FF：FF：FF：FF：FF：FF：FF
B. from 20：00：00：00：00：00：00：00 to 20：FF：FF：FF：FF：FF：FF：FF
C. from 30：00：00：00：00：00：00：00 to 30：FF：FF：FF：FF：FF：FF：FF
D. from 40：00：00：00：00：00：00：00 to 40：FF：FF：FF：FF：FF：FF：FF
A. NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port.
B. NPIV can be enabled on a per-VSAN basis.
C. NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode.
D. NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.
E. NPIV must not be enabled on a switch that is also running N-port virtualization.
A. 2
B. 3
C. 4
D. 6
E. 12
A. After enabling NPIV， switch interfaces can only be placed into NP， F， or SD modes of operation.
B. NPV devices log in to NPIV devices.
C. NPIV requires the Enterprise License Package.
D. NPIV is supported on the Cisco MDS， N7K， and N5K families of switches.
E. A director class switch should not be placed into NPIV mode.
A. B200
B. C210
C. B250
D. C260
E. C460
A. 800 MHz
B. 900 MHz
C. 1066 MHz
D. 1333 MHz
E. 1666 MHz
A. Dual-rank DIMMs are not supported.
B. 16-GB DIMMs are too slow.
C. The largest DIMM an Intel 55xx or 56xx CPU can address is 32 GB
D. The memory bus would be too long.
E. The blade would run too hot.
最新試題
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
From the Cisco UCS CLI， how do you verify which uplink ports a blade server is using for its network connectivity？（）
Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
On a Cisco Unified Computing System （UCS）， which two statements regarding Ethanalyzer are true？（）
Refer to the exhibit.The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B （Path C）. Which actions might be used to change this behavior？（）
Application Control Engine （ACE） can check the health of servers and server farms by configuring health probes （which are sometimes referred to as keepalives）. A probe can be one of many types. Which are valid ACE probes？ （）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）