n1kv-l3（config）# show lacp offload status
Current Status ： Enabled
Running Config Status ： Enabled
Saved Config Status ： Disabled
What two facts does the output signify？ （）
A. LACP is enabled on the Nexus 1000v.
B. LACP will be offloaded to the upstream switch.
C. LACP will be negotiated to the VM.
D. LACP is negotiated by the VSM.
E. LACP is negotiated by the VEM in all instances.
您可能感興趣的試卷
你可能感興趣的試題
A. intelligent traffic steering to the VSG
B. offloading the processing from the VSG to the VEM
C. intelligent traffic steering to the VNMC
D. offloading the processing from the VSG to the flow manager
E. deep packet inspection
A. channel-group auto mode on
B. channel-group auto mode active
C. channel-group auto mode on sub-group cdp
D. channel-group auto mode on sub-group manual
E. channel-group auto mode on mac-pinning
A. accounting
B. authentication
C. authorization
D. network monitoring
E. network planning
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
When configuring vPC-HM CDP with multiple links to the same switch， are port-channels required？（）
A. Each link between the upstream switch and the VEM is an individual subgroup.
B. Connections that go to the same upstream switch must be configured with the command channel-group
C. Connections that go to the same upstream switch must be configured with the command channel-group
D. With vPC-HM CDP， the user can pin traffic from a specific VM to a specific uplink.
E. Connections that go to the same upstream switch must be configured with the command channel-group
A. 0
B. 1
C. 2
D. 3
E. 4
A. use summary view in the device manager
B. from the DCNM-SAN client， view ISLs in real time from the Performance drop-down list
C. for each port channel， select Monitor Continually
D. configure traps for each port channel to utilize RMON
E. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance collections
A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（）
switch# show npv status
npiv is enabled
External Interfaces：
===============
InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other
Number of External Interfaces： 4
A. NPV is not enabled on the core switch？
B. The interface connected to the Core switch is in admin down state
C. The local host interface belongs to the wrong VSAN？
D. The local host interface is not able to login
A. The switch receives the FCoE frame and forwards it to another switch over its VE port.
B. The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.
C. The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.
D. The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.
A. Up to 25 m bus length
B. Only one device per SCSI bus
C. Up to 16 devices per SCSI bus
D. Half-duplex operation
E. Full-duplex operation
最新試題
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
Which of the following are supported in Cisco Global Site Selector？ （）
What would be the cause for the following fault in UCS Manager？（） "ether VIF x / xxx down， reason： ENM source pinning failed"
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
Where are SAN Port Channel is created in UCS Manager？（）
On a Cisco Unified Computing System （UCS）， which two statements regarding Ethanalyzer are true？（）
Which statement is true regarding Backup tasks in Cisco UCS？（）
Which is true when describing a connection replication in Cisco ACE？（）
An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error （Refer to the exhibit）.What is the cause of this error？（）
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）