A. use summary view in the device manager
B. from the DCNM-SAN client， view ISLs in real time from the Performance drop-down list
C. for each port channel， select Monitor Continually
D. configure traps for each port channel to utilize RMON
E. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance collections
您可能感興趣的試卷
你可能感興趣的試題
A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（）
switch# show npv status
npiv is enabled
External Interfaces：
===============
InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other
Number of External Interfaces： 4
A. NPV is not enabled on the core switch？
B. The interface connected to the Core switch is in admin down state
C. The local host interface belongs to the wrong VSAN？
D. The local host interface is not able to login
A. The switch receives the FCoE frame and forwards it to another switch over its VE port.
B. The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.
C. The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.
D. The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.
A. Up to 25 m bus length
B. Only one device per SCSI bus
C. Up to 16 devices per SCSI bus
D. Half-duplex operation
E. Full-duplex operation
A. Ethernet FCS
B. Source address
C. Destination address
D. EtherType
E. Protocol type
A. It is required to establish the point-to-point FCoE links with the first switch in the path.
B. It is required to establish the point-to-point FCoE links with any switch across multiple Ethernet segments.
C. It is not used to build the FCoE links.
D. It is used to ensure lossless transport.
A. Fibre Channel ports must be configured from the first port in the module.
B. Ethernet ports must be configured from the last port in the module.
C. Fibre Channel ports must be configured from the last port in the module.
D. Ethernet ports must be configured from the first port in the module.
A. LLDP transmit and receive are disabled
B. The initiator server has no connectivity to the target storage
C. FIP negotiation timing
D. Peer does not support LLDP
E. VSAN trunk protocol has been enabled
A. Server’s CNA does not support DCBX and PFC TLV was not negotiated.
B. A "no-drop" class has not been configured for FCoE
C. The system is running with the default QOS policies.
D. The link is oversubscribed.
A. show flogi database
B. show system fc login
C. show npv flogi-table
D. show npv fcns database
E. show interface vfc X flogi
F. show interface flogi
A. Priority flow control
B. Buffer-to-buffer credits
C. TCP retransmission
D. Ethernet checksum
E. QoS policies
最新試題
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
A Cisco Application Control Engine Appliance （ACE） non-admin context does not support "sticky" configuration. What is the reason for this issue？（）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）
Refer to the exhibit.Your company requires a Cisco UCS configuration that will， at a minimum， allow the configuration in the provided exhibit. Which Cisco UCS components will meet the requirement？（）
Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
Which statement is true about "full state backup" in a Cisco Unified Computing System？（）