多項選擇題Overlay Transport Virtualization (OTV) provides an overlay that enables Layer 2 connectivity between separate Layer 2 domains, while keeping these domains independent and preserving the fault isolation, resiliency, and load-balancing benefits of an IP-based interconnection. Which statements are true about OTV Adjacency Server?()

A. Adjacency Server is required when OTV is deployed with unicast-only transport.
B. Adjacency Server is required when OTV is deployed with multicast-enabled transport.
C. Each OTV device wishing to join a specific OTV logical overlay needs to first register with the Adjacency Server.
D. Each OTV device trying to join a specific OTV logical overlay needs to be configured as an Adjacency Server.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題SNMPv3 authorizes management operations only by configured users and encrypts SNMP messages. Which authentication protocols does Cisco NX-OS Software use for SNMPv3?()

A. NMAC-SHA-96 authentication protocol
B. HMAC-MD5-96 authentication protocol
C. Community String Match protocol
D. NMAC-MD5-96 authentication protocol
E. HMAC-SHA-96 authentication protocol

2.單項選擇題In a Cisco Nexus 7000 platform configured with GLBP, which GLBP timer can be tuned to prevent unnecessary GLBP state changes during a switchover or ISSU?()

A. GLBP redirect timer
B. GLBP forwarder pre-empt delay minimum timer
C. GLBP hold timer
D. GLBP pre-empt delay minimum timer
E. GLBP extended hold timer
F. GLBP nonstop forwarding timer

3.單項選擇題By default, what type of SSH server key is generated by Cisco NX-OS Software?()

A. DSA key generated with 512 bits
B. RSA key generated with 768 bits
C. RSA key generated with 1024 bits
D. DSA key generated with 1024 bits
E. RSA key generated with 2048 bits

5.單項選擇題Where is a typical request in the Cisco UCS XML API placed in the data management engine, and, after the request is confirmed, what is updated?()

A. The request is placed in the transactor queue in FIFO order and the management information tree is updated.
B. The request is placed in the replicator and persistifier and the store is updated.
C. The request is placed in the data management engine and the application gateway is updated. 
D. The request is placed in the buffer queue and the commit buffer queue is updated.

6.單項選擇題

On a Cisco Nexus 7000 Series Switch, what is the purpose of this command?() 
switch# config terminal 
switch(config)# mac address-table learning-mode conversational vlan 1-10 
switch(config)# 

A. Enable conversational learning on FabricPath vlans 1-10 for F-Series module
B. Enable FabricPath protocol on VLANs 1–10
C. No need for this command as conversational learning is enabled by default for all VLANs.
D. Enable conversational learning on Classical Ethernet VLAN for F-Series module

7.多項選擇題Which three statements best describe multicast operation on Cisco Nexus switches in a data center?()

A. Cisco NX-OS Software does not support PIM dense mode.
B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.
C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.
E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.

8.單項選擇題When using Overlay Transport Virtualization (OTV), how do L2 multicast frames traverse the overlay?()

A. The L2 multicast frames are encapsulated in an OTV packet using the configured control-group multicast address for transport
B. The L2 multicast frames are dropped because multicast cannot be carried across the overlay 
C. The L2 multicast frames are encapsulated in an OTV packet using the configured data-group multicast address for transport
D. The L2 multicast frames are forwarded natively across the overlay based on their multicast IDs

9.單項選擇題What is the default Time to Live (TTL) valuse in Cisco FabricPath?()

A. 128
B. 32
C. 64
D. Dependent on the number of switch IDs in the topology

10.單項選擇題Which statement best describes what is depicted in the show command output?()

A. IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.
B. The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.
C. IGMP snooping has been disabled on the VLAN 120 SVI.
D. IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.
E. IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.

最新試題

Which are valid statements about Cisco Virtual Interface Card (VIC)? ()

題型:多項選擇題

What is the purpose of this command in a Cisco Application Control Engine?() switch/Admin# show np 1 me-stats "-F0 v" 

題型:單項選擇題

From the Cisco UCS CLI, how do you verify which uplink ports a blade server is using for its network connectivity?()

題型:單項選擇題

In the event of a GSS failure in a GSS cluster, which is true?()

題型:單項選擇題

What is the use of an "all configuration" backup in Cisco UCS?()

題型:單項選擇題

Which statement is true about "full state backup" in a Cisco Unified Computing System?()

題型:單項選擇題

In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()

題型:單項選擇題

Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true? ()

題型:多項選擇題

Which is true when describing a connection replication in Cisco ACE?()

題型:單項選擇題

Application Control Engine (ACE) can check the health of servers and server farms by configuring health probes (which are sometimes referred to as keepalives). A probe can be one of many types. Which are valid ACE probes? ()

題型:多項選擇題