A. GLBP redirect timer
B. GLBP forwarder pre-empt delay minimum timer
C. GLBP hold timer
D. GLBP pre-empt delay minimum timer
E. GLBP extended hold timer
F. GLBP nonstop forwarding timer
您可能感興趣的試卷
你可能感興趣的試題
A. DSA key generated with 512 bits
B. RSA key generated with 768 bits
C. RSA key generated with 1024 bits
D. DSA key generated with 1024 bits
E. RSA key generated with 2048 bits
A. Root priority
B. System ID
C. Bridge ID
D. Switch ID
E. Port ID
F. Subswitch ID
A. The request is placed in the transactor queue in FIFO order and the management information tree is updated.
B. The request is placed in the replicator and persistifier and the store is updated.
C. The request is placed in the data management engine and the application gateway is updated.
D. The request is placed in the buffer queue and the commit buffer queue is updated.
On a Cisco Nexus 7000 Series Switch, what is the purpose of this command?()
switch# config terminal
switch(config)# mac address-table learning-mode conversational vlan 1-10
switch(config)#
A. Enable conversational learning on FabricPath vlans 1-10 for F-Series module
B. Enable FabricPath protocol on VLANs 1–10
C. No need for this command as conversational learning is enabled by default for all VLANs.
D. Enable conversational learning on Classical Ethernet VLAN for F-Series module
A. Cisco NX-OS Software does not support PIM dense mode.
B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.
C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.
E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.
最新試題
Which of the following are supported in Cisco Global Site Selector? ()
Which is true when describing a connection replication in Cisco ACE?()
Which statements are true regarding the Cisco UCS fabric failover feature? ()
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()
From the Cisco UCS CLI, how do you verify which uplink ports a blade server is using for its network connectivity?()
In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()
In the event of a GSS failure in a GSS cluster, which is true?()
What is the appliance port used to connect to in a Cisco Unified Computing System?()
Server load balancing (SLB) is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request? ()
What is the use of an "all configuration" backup in Cisco UCS?()