下列哪些陳述正確描述一旦啟動過程中交換機的狀態已經完成?()
A.由于的FastEthernet0/12將是最后上來,它不會被STP阻塞。
B.此交換機的遠程訪問管理將不可能配置更改。
C.多個VLAN將需要此交換機創建。
D.交換機將需要以支持VLAN和STP不同的IOS代碼。
您可能感興趣的試卷
你可能感興趣的試題
所顯示的輸出在一個交換機被產生。哪三種表述是正確的?()
A.所有端口都將在丟棄,學習,或轉發的狀態
B.Thiry VLAN是否該交換機上的配置
C.網橋優先級比生成樹的默認值
D.所顯示的所有接口都在共享媒體
E.所有指定端口都處于轉發狀態
F.開關必須是該交換機上的所有VLAN的根橋
A. SW1#show swithport port-security interface FastEthernet 0/12
B. SW1# show swithport port-secure interface FastEthernet 0/12
C. SW1# show port-secure interface FastEthernet 0/12
D. SW1#show running-config
E. SW1#show port-security interface FastEthernet 0/12
A.手動關閉的接口。
B.物理安全的接口。
C.配置虛擬終端的密碼和登錄過程。
D.輸入一個訪問列表,并將其應用到使用access-class命令終端接口。
E.創建一個訪問列表,并將其應用到使用access-group命令終端接口。
Refer to the exhibit.The network shown in the exhibit is running the RIPv2 routing protocol.The network has converged,and the routers in this network are functioning properly .The FastEthernet0/0 interface on R1 goes down.In which two ways will the routers in this network respond to this change?()
A.R1 will send LSAs to R2 and R3 informing them of this change, and then all routers will send periodic updates at an increased rate until the network again converges.
B.Because of the split-horizon rule, router R2 will be prevented from sending erroneous information to R1 about connectivity to the 192.168.1.0 network.
C.When router R2 learns from R1 that the link to the 192.168.1.0 network has been lost, R2 will respond by sending a route back to R1 with an infinite metric to the network.
D.Routers R2 and R3 mark the route as inaccessible and will not accept any further routing updates from R1 until their hold-down timers expire.
E.All routers will reference their topology database to determine if any backup routes to the 192.168.1.0 network are known.
A. access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B. access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C. access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D. access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E. access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F. access-list 10 permit ip 192.168.146.0 255.255.255.0
最新試題
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
OSI 哪一層可提供有序的數據重構服務?()