所顯示的輸出在一個交換機被產生。哪三種表述是正確的?()
A.所有端口都將在丟棄,學習,或轉發的狀態
B.Thiry VLAN是否該交換機上的配置
C.網橋優先級比生成樹的默認值
D.所顯示的所有接口都在共享媒體
E.所有指定端口都處于轉發狀態
F.開關必須是該交換機上的所有VLAN的根橋
您可能感興趣的試卷
你可能感興趣的試題
A. SW1#show swithport port-security interface FastEthernet 0/12
B. SW1# show swithport port-secure interface FastEthernet 0/12
C. SW1# show port-secure interface FastEthernet 0/12
D. SW1#show running-config
E. SW1#show port-security interface FastEthernet 0/12
A.手動關閉的接口。
B.物理安全的接口。
C.配置虛擬終端的密碼和登錄過程。
D.輸入一個訪問列表,并將其應用到使用access-class命令終端接口。
E.創建一個訪問列表,并將其應用到使用access-group命令終端接口。
Refer to the exhibit.The network shown in the exhibit is running the RIPv2 routing protocol.The network has converged,and the routers in this network are functioning properly .The FastEthernet0/0 interface on R1 goes down.In which two ways will the routers in this network respond to this change?()
A.R1 will send LSAs to R2 and R3 informing them of this change, and then all routers will send periodic updates at an increased rate until the network again converges.
B.Because of the split-horizon rule, router R2 will be prevented from sending erroneous information to R1 about connectivity to the 192.168.1.0 network.
C.When router R2 learns from R1 that the link to the 192.168.1.0 network has been lost, R2 will respond by sending a route back to R1 with an infinite metric to the network.
D.Routers R2 and R3 mark the route as inaccessible and will not accept any further routing updates from R1 until their hold-down timers expire.
E.All routers will reference their topology database to determine if any backup routes to the 192.168.1.0 network are known.
A. access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B. access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C. access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D. access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E. access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F. access-list 10 permit ip 192.168.146.0 255.255.255.0
A. access-list 50 deny 192.168.1.1 0.0.0.255
B. access-list 110 permit ip any any
C. access-list 2500 deny tcp any host 192.168.1.1 eq 22
D. access-list 101 deny tcp any host 192.168.1.1
最新試題
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
要將數據包發送到遠程網絡,應使用哪種設備?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍?()