A.client traffic allowed， data captured on all channels
B.client traffic allowed， data captured on a single channel
C.no client traffic allowed， data captured on a single channel
D.no client traffic allowed， data captured on all channels
您可能感興趣的試卷
你可能感興趣的試題
You are installing a cisco 4402 series wireless lan controller.
What type of interface is used on the uplink port？（）
A.1000base-x mini-gbic
B.10/100/1000 mbps rj45
C.10/100 mbps rj45
D.1000base-sx
A.interference，utilization，and rf diffraction
B.clients，utilization，and multipath interference
C.noise，interference，and coverage holes
D.noise interference，and multipath interference
Static wep is configured on the access point. you are authenticated and associated to the access point but are unable to obtain an ip address.
Which of the following will cause this problem？（）
A.invalid radio type selected
B.no wep key configured on the client
C.invalid ssid configured
D.invalid wep key
An reap was supporting 16 wlans， but now it only supports one.
What happened to cause the change？（）
A.controller connectivity has been lost.
B.the access point lost its configuration.
C.the access point was rebooted.
D.an access point firmware upgrade is in progress.
A rogue access point is detected on the cisco wcs consolE. upon investigation，the access point is discovered to belong to a neighboring business.
Your administrator should designate the rogue access point as which of the following？（）
A.known internal
B.managed
C.friendly
D.known external
最新試題
You are trying to change the polling parameters used by the location manager via the Cisco WCS，and your request is being denied. What is wrong？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on.Which situation would result in thistype of problem？（）
The Cisco Wireless Location Appliance provides an audit trail for each device tracked for up to how many days？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）