In a deployment using the lightweight access points， clients set up to authenticate with eap-peap or eap-cisco wireless （leap） cannot authenticatE. upon inspection of the failed attempts report you see the following error： "unknown network access server nas."
What two problems can cause this type of failure？（）
A.misconfigured ip address of the aaa server on the wireless controller
B.misconfigured ip address of the wireless lan controller on the aaa server
C.misconfigured eap type on the wireless lan controller
D.misconfigured shared secret on the wireless lan controller
E.misconfigured eap type on the aaa server
您可能感興趣的試卷
你可能感興趣的試題
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid tag data is not being collected.
On which device would you verify that rfid status has been enabled？（）
A.cisco wcs
B.access point
C.wireless controller
D.location manager
A.802.11b/g
B.radio
C.access point
D.802.11a
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid beacon rate is 10 seconds. you have discovered an issue with the rfid timeout value.
How should this value be changed？（）
A.change the value on the wireless controller to 45 seconds.
B.change the value on the wireless controller to 95 seconds.
C.change the value on the cisco wcs to 95 seconds.
D.change the value on the cisco wcs to 45 seconds.
A.frame monitoring
B.radio scan
C.self-healing
D.client walkabout
You are trying to deploy a configuration job to an ios access point using the wlse， but the job fails.
Which of the following would cause this failure？（）
A.snmp communities
B.telnet/ssh user/password
C.wlccp credentials
D.http user/password
最新試題
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）