A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch.
How would you interconnect and configure lag for connectivity and ensure redundancy？（）
A.all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
B.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
C.all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
D.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.
您可能感興趣的試卷
你可能感興趣的試題
A.50 feet [15 meters]
B.200 feet [60 meters]
C.150 feet [45 meters]
D.100 feet [30 meters]
A.gtc
B.md5
C.ms-chap v2
D.pap
A.develops a training plan and delivers via a custom workshop or e-learning
B.helps improve the performance and functionality of the infrastructure operations and network management system
C.reduces the risk of downtime caused by facilities-related problems
D.provides a step-by-step plan detailing the installation and service-commission requirement tasks to be staged in a controlled implementation environment that emulates a customer network
A.force infrastructure devices to associate only to this ssid
B.set infrastructure ssid
C.multiple bssid
D.set data beacon rate
E.enable ip redirection on this ssid
One of your customers has decided to deploy location-based services in addition to existing wireless services. the customer requires that the additional access points to be deployed in
monitor-only modE.
The most likely reason for this requirement is that the customer has which of these existing wireless devices？（）
A.data collection
B.802.11b/g voip
C.802.11b and g clients
D.rfid tags
最新試題
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）