向日葵app下载安装草莓,人妻系列无码专区视频,18禁动漫无码无遮挡免费看

判斷題 The network is displayed in the diagram below：

You have just been hired by to help their main office expand. The main offices have enhanced their wiring closets with some Layer 3 switches. The new distribution layer switch has been installed and a new access layer switch cabled next to it. Your task is to configure the distribution layer and access layer
switch with VTP to share VLAN information， then to configure inter-VLAN routing on the distribution layer switch to route traffic between the different VLANs that are configured on the access layer switches.
VTP Domain Distribution
VLAN Ids 20 31
IP Addresses 172.16.71.1/24 172.16.132.1/24
These are your specific tasks：
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches in the future.
6. All VLANs and VTP configurations are to completed in the global configuration
To configure the switch click on the host icon that is connected to the switch be way of a serial console cable.

參考答案：正確

您可能感興趣的試卷

你可能感興趣的試題

1.判斷題 Network topology Exhibit：

You work as a network engineer for. You are required to set up the network being displayed in the network topology exhibit through the console using IOS commands.

參考答案：正確

2.判斷題
Each of these vlans has one host each on its port SVI on vlan 1 - ip 192.168.1.11 with snm Switch B -
Ports 3， 4 connected to ports 3 and 4 on Switch A
Port 15 connected to Port on Router.
Tasks to do
1. Use non proprietary mode of aggregation with Switch B being the initiator -- Assumed use LACP with B being in Active mode
2. Use non proprietary trunking and no negotiation -- Assumed use switchport mode trunk and switchport trunk encapsulation dot1q
3. Restrict only to vlans needed
-- Assumed either vtp pruning or allowed vlan list. vtp pruning command did not seem to work on the simulator so landed using allowed vlan list
4. SVI on vlan 1 with some ip and subnet given
5. Configure switch A so that nodes other side of Router C are accessible -- Assumed this to mean that on switch A default gatway has to be configured.
6. Make switch B the root
-- Could not get this to work. Exam hung when I tried the command spanning-tree vlan 1，21-23 priority 4096

參考答案：正確

3.判斷題 Configure the Multilayer Switch so that PCs from VLAN 2 and VLAN 3 can communicate with the Server.

參考答案：正確

4.多項選擇題Which three characteristics are true about voice traffic in the campus network？（）

A.TCP retransmits
B.benign
C.greedy
D.drop sensitive
E.smooth
F.delay insensitive

點擊查看答案

5.單項選擇題 Refer to the exhibit. The command spanning-tree guard root is configured on interface Gi0/0 on both switch S2 and S5. The global configuration command spanning-tree uplinkfast has been configured on both switch S2 and S5. The link between switch S4 and S5 fails.
Will Host A be able to reach Host B？（）

A.Yes. Traffic can pass either from switch S6 to S3 to S2 to S1， or， from switch S6 to S5 to S2 to S1.
B.No. Traffic will pass from switch S6 to S5 and dead-end at interface Gi 0/0.
C.No. Traffic will loop back and forth between switch S5 and S2.
D.Yes. Traffic will pass from switch S6 to S3 to S2 to S1.
E.No. Traffic will either pass from switch S6 to S5 and dead-end， or traffic will pass from switch S6 to S3 to S2 and dead-end.

點擊查看答案