Given the network diagram, which routers currently make up the IS - IS backbone?（）
A. R3,R4,R6
B. R2,R3,R6,R7
C. R1 through R8
D. R3,R4,R5,R6
E. R2,R3,R4,R6,R7
您可能感興趣的試卷
你可能感興趣的試題
A. support for designated intermediate systems and backup designated intermediate systems
B. support for multip le areas per router
C. support for classless routing
D. support for address summarization between areas
E. support for both DIS adjacencies and neighbor adjacencies
According to the following output, can you tell me which command can redistribute IGRP into EIGRP?（）
A. Under t he router eigrp mode add redistribute igrp 123 subnets
B. Under the router igrp mode add redistribute eigrp 123
C. None, EIGRP and IGRP are automatically redistributed in this instance.
D. Under the router eigrp mode add redistribute igrp 123
A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C. Which configuration on Router B will achieve the desired effect?（）
A.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 1 72.16.14.4
B.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.3
C.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip polic y route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
D.access -list 1 deny 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
During the redistribution process configured on RTA, some of the EIGRP routes, such as 10.1.1.0/24 and 10.2.2.0/24,are not being redistributed into the OSPF routing domain. Which two items could be a solution to this proble m?（）
A. Change the EIGRP AS number from 100 to1 in the redistribute command.
B. Add the subnets option to the redistribute command.
C. Change the metric - type to2 in the redistribute command.
D. Configure the redistribute command under router eigrp 1 i nstead.
E. Change the metric to an EIGRP compatible metric value (bandwidth, delay, reliability, load, MTUs) in the redistribute command.
A. 39.0f01.0002.0000.0c00.1111.00
B. 48.0f01.0002.0000.0c00.1111.00
C. 49.0004.30ac.0000.3090.c7df.00
D. 52.0f01.0002.0000. 0c00.1111.00
最新試題
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable OSPFv3 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about OSPFv3 on R1 after this configuration has been pasted into R1?（）ipv6 router ospf 1ipv6 unicast- routinginterface f0/0ipv6 address 2000 ::1/64ipv6 ospf 1 area 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 ospf 1 area 0
Which of the following features work the same in both RIP- 2 and RIPng?（）
Which of the following are true of both OSPFv2 and OSPFv3?（）
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?（）
Router R1 connects to Router R2 over an Ethernet LAN with both routers using their F0/0 interfaces. R1 learns a route from R2 using EIGRP f or IPv6. That route lists F0/0 as the outgoing interface with R2 as the next hop. The configuration excerpt shows all relevant configuration on R2's F0/0 interface. Which of the following is true about R1's route?（）interface f0/0mac - address 1111.1111.1 111ipv6 address 2000::/64 eui - 64ipv6 address 2001::1/64
Which of the following is helpful to allow an IPv6 host to learn the IP address of a default gateway on its subnet?（）
The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in this case?（）D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive
Look at the following configuration below and select the statements that are true.（）RD2(config)#router ospf 100RD2(config - router)# distance 180 10.1.10.1 0.0.0.0 match - meRD2(config -router)#!RD2(config - router) #ip access - list standard match - meRD2(config - std - nacl)# permit host 172.16.0.0
An enterprise h as plans to start adding IPv6 support. For the first year, the IPv6 will be in small pockets spread around the existing large IPv4 network, with occasional IPv6 traffic while applications teams test IPv6 - enabled servers and applications.Which of the fol lowing tools would be most appropriate?（）
Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?（）