多項選擇題

VOIP is being implemented in the Company network and you need to assess the need for QoS.  
Which of the following network problems would indicate a need to implement QoS features?()

A.Mis-routed packets  
B.Excess jitter
C.Delay of critical traffic
D.Packet loss due to congestion
E.Data link layer broadcast storms
F.FTP connections unsuccessful


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題

Jitter is causing problems with the VOIP application in the Company network. 
What causes  network jitter?()

A.Variable queue delays
B.Packet drops
C.Transmitting too many small packets
D.Compression

3.單項選擇題

Refer to the exhibit. A trunk link is connected between switch A_SW and switch D_SW. Based on  the configuration shown in the exhibit, 
how would the traffic coming from the switch A_SW be  managed? ()

A.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames coming from the IP  phone.
B.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames received on the IP  phone.
C.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames coming from port  Fa0/1 on A_SW.
D.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the  A_SW switch port Fa0/4.
E.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the IP  phone port.

4.單項選擇題

Refer to the exhibit. 
Which statement is true when voice traffic is forwarded on the same VLAN  used by the data traffic? ()

A.The voice traffic cannot be forwarded to the distribution layer.
B.The voice traffic cannot use 802.1p priority tagging.
C.Port security cannot be enabled on the switch that is attached to the IP phone.
D.Quality of service cannot be applied for the voice traffic.

5.單項選擇題

Refer to the exhibit.
 Why does the trust state of interface FastEthernet 0/3 show "not trusted"?  ()

A.DSCP map needs to be configured for VOIP.
B.ToS has not been configured.
C.ToS has been misconfigured.
D.The command mls qos needs to be turned on in global configuration mode.
E.There is not a Cisco Phone attached to the interface.

最新試題

What must be the same to make multiple switches part of the same Multiple Spanning Tree (MST)?()

題型:單項選擇題

Which router redundancy protocol cannot be configured for interface tracking?()

題型:單項選擇題

Which three statements about STP timers are true?()

題型:多項選擇題

Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain, the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change?()

題型:單項選擇題

If G1/0/1 on DS1 is shutdown, what will be the current priority value of the Vlan105’s group on DS1 ?()

題型:單項選擇題

During routine maintenance, it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time, DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ? ()

題型:單項選擇題

Which two statements are true about BPDU port-guard and BPDU filtering?()

題型:多項選擇題

Refer to the exhibit. Which Virtual Router Redundancy Protocol (VRRP) statement is true about the roles of the master virtual router and the backup virtual router?()

題型:單項選擇題

Refer to the exhibit. What does the command channel-group 1 mode desirable do? () 

題型:單項選擇題

Which two statements are true when the extended system ID feature is enabled? ()

題型:多項選擇題