A. Router# show ip eigrp routes *
B. Router# show ip eigrp summary
C. Router# show ip eigrp topology
D. Router# show ip eigrp adjacencies
E. Router# show ip eigrp neighbors detail
您可能感興趣的試卷
你可能感興趣的試題
You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:
Router(config)# router ospf 99
Router(config-if)# network 10.0.0.0 255.0.0.0 area 0
Based on this information, what is the most likely problem?（）
A. The process id is configured improperly.
B. The OSPF area is configured improperly.
C. The network wildcard mask is configured improperly.
D. The network number is configured improperly.
E. The AS is configured improperly.
F. The network subnet mask is configured improperly.
G. All of the above are likely problems.
A. R 12.18.8.0/24 [120/1] via 12.18.2., 00:00:10, Serial0
B. R 12.18.11.0/24 [120/7] via 12.18.9.1, 00:00:03, Serial1
C. C 12.18.1.0/24 is directly connected, Ethernet0
D. R 12.18.5.0/24 [120/15] via 12.18.2.2, 00:00:10, Serial0
You are a network technician at TestKing, Inc. You are currently troubleshooting a routing issue on the Testking1 router. You issue the show ip route command. The output from the command is displayed in the following exhibit:
Which one of the following routes WILL NOT be entered into its neighboring routers routing table?（）
A. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
B. C 192.168.1.0/24 is directly connected, Ethernet0
C. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
E. None of the above
You are a network administrator at TestKing, Inc. and you're getting complaintsthat users on the TestKing2 Ethernet network can't access the TestKing1 site. Totroubleshoot this, you begin by looking at the Testking1 and Testking2 routerconfigurations as shown below:
Based on the above output, what is the underlying cause of this problem?（）
A. Link state routing protocol is missing.
B. Incorrectly configured IP addresses
C. IGRP is incorrectly configured.
D. Frame relay is not configured.
E. None of the above
A. The IP addresses of workstations allowed gain access to the router via an access list
B. Permanent name-to-address mappings created using the ip host command.
C. Temporary and permanent DNS entries.
D. The names of the routers created using the hostname command.
E. The length of time of users logged into the router, as well as the duration
最新試題
Which of the following if addresses can be assigned to host devices?（）
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.（）
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. （）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）