Part of the routing table of router R1 is displayed below：
S 62.99.153.0/24 [1/0] via 209.177.64.130
172.209.12.0/32 is subnetted， 1 subnets
D EX 172.209.1
[170/2590720] via 209.179.2.114， 06：47：28， Serial0/0/0.1239
62.113.17.0/24 is variably subnetted， 2 subnets， 2 masks
D EX 99.3.215.0/24
[170/27316] via 209.180.96.45， 09：52：10， FastEthernet11/0/0
[170/27316] via 209.180.96.44， 09：52：10， FastEthernet11/0/0
25.248.17.0/24
[90/1512111] via 209.179.66.25， 10：33：13， Serial0/0/0.1400001
[90/1512111] via 209.179.66.41， 10：33：13， Serial0/0/0.1402001
62.113.1.0/24 is variably subnetted， 12 subnets， 2 masks
D 62.113.1.227/32
[90/2611727] via 209.180.96.45， 10：33：13， FastEthernet1/0/0
[90/2611727] via 209.180.96.44， 10：33：13， FastEthernet1/0/0
S* 0.0.0.0/0 [1/0] via 209.180.96.14
From analyzing the above command output， what is the administrative distance of the externalEIGRP routes？（）
A.24
B.32
C.90
D.170
E.27316
F.None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
A.The neighboring router stops receiving ACK packets from this router
B.The neighboring router starts receiving route updates from this router
C.The neighboring router is too busy to answer the query （generally caused by high CPUutilization）
D.The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet
A、The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast application
B、The last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
C、To calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0
D、The first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
A.show ip ospf
B.show ip route
C.show ip protocols
D.show ip ospf database
E.None of the other alternatives apply
A.Layer 5
B.Layer 4
C.Layer 3
D.Layer 2
E.Layer 1
A.show ip protocol
B.show ip route
C.show ip ospfinterface
D.show ip ospf
E.show ip nterface
F.None of the other alternatives apply
最新試題
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Which statement correctly describes IPsec VPN backup technology？（）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）
Drag the DSL local loop topic on the left to the correct descriptions on the right.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Drag and drop each management protocol on the above to the correct category on the below.
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
cisco ios command to interface dialer 0