A.automated alternate routing （AAR）
B.Cisco CallManager Attendant Console
C.real-time protocol （RTP）
D.Survivable Remote Site Telephony （SRST）
您可能感興趣的試卷
你可能感興趣的試題
A.to support fault and policy reporting， the WLSE requires a Wireless Control System （WCS）
B.when WLSE detects an AP failure， it automatically increases the power and cell coverage of nearby APs
C.WLSE requires the 2700 location appliance to offer location tracking
D.WLSE can locate rogue APs and automatically shut them down
E.WLSE configuration is done using the command line interface （CLI） or a WEB based template
A.policy routing
B.increase link capacity
C.WRED
D.CBWFQ
E.LFI
F.WFQ
A.TKIP protects RC4 encryption keys
B.CKIP and TKIP protect AES encryption keys
C.TKIP encryption is more processor intensive than AES encryption is
D.WPA requires TKIP encryption， whereas WPA2 supports AES encryption
E.WPA requires AES encryption， whereas WPA2 supports TKIP encryption
A.a set of rules that can be established and associated with the ingress and egress ports of the control plane
B.improves performance of the control plane by marking control plane packets with DSCPEF
C.protects the control plane on a router from DoS attacks
D.treats the control plane as a separate entity with its own ingress （input） and egress （output） ports
E.provides the control plane with a separate token bucket
F.enhances security of the control plane by tunneling packets to and from the control plane
A.both WPA and WPA2 require authentication support via IEEE 802.1 x and Pre-Shared Key （PSK）
B.both WPA and WPA2 address all known Wired Equivalent Privacy （WEP） vulnerabilities in the IEEE 802.11i security implementation
C.WPA is supported on client devices only. WPA2 is supported on both access point （AP） and client devices
D.WPA provides only a standard for authentication. WPA2 provides a standard for authentication and encryption
E.WPA requires encryption support via Temporal Key Integrity Protocol （TKIP） WPA2 provides encryption support via （symmetric block cipher）AES-CCMP
最新試題
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM？（）
Which two commands should be entered on a WLAN controller to remove any residual configuration？（）
What are two reasons to implement H·323 gatekeepers？（）
In the design of a QoS solution， which two factors should be taken into consideration？（）
Which three user interfaces exist for the Cisco WLAN Controllers？（）
Which two VoIP capabilities are utilized when the CallManager and the gateway are configured for Survivable Remote Site Telephony？（）
For delay sensitive traffic， what are the three best ways that are used to prevent packet loss？ （）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）