單項選擇題Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()

A.Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.
B.R2 will continue to forward traffic to R1, but R1 will drop the traffic because its neighbor adjacency with R2 has failed.
C.R2 will continue forwarding traffic to and through R1, but R1 will drop this traffic because it is not capable of maintaining its forwarding state.
D.All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題As a network administrator, can you tell me what the root guard feature provides in a bridgednetwork?()

A.It ensures that BPDUs sent by the root bridge are forwarded in a timely manner
B.It enforces the root bridge placement in the network
C.It ensures that all ports receiving BPDUs from the root bridge are in the forwarding state.
D.It ensures that the bridge is elected as root bridge in the network.

2.單項選擇題Which statement is correct in reference to IPv6 multicast?()

A.IPv6 multicast uses Multicast Listener Discovery.
B.The first 8 bits of an IPv6 multicast address are always FF (1111 1111).
C.IPv6 multicast requires MSDP.
D.PIM dense mode is not part of IPv6 multicast.

3.單項選擇題In Frame Relay, FECN messages indicating congestion are sent or received by which of following?()

A.Sent by the destination
B.Received by the sender
C.Received by the destination
D.Sent by the sender

4.單項選擇題Prior to 802.1w, Cisco implemented a number of proprietary enhancements to 802.1D to improve convergence in a Layer 2 network. Which statement is correct?()

A.Only UplinkFast and BackboneFast are specified in 802.1w; PortFast must be manually configured.
B.Only PortFast is specified in 802.1w; UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast, UplinkFast, and BackboneFast are specified in 802.1w.

最新試題

Which two attributes need to match for two switches to become members of the same MST region?  ()

題型:多項選擇題

Phase I and Phase II DMVPN differ in terms of which of these characteristics?()

題型:?jiǎn)雾?xiàng)選擇題

Which statement best describes OSPF external LSAs (type 5)?()

題型:?jiǎn)雾?xiàng)選擇題

Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()

題型:多項選擇題

Which three are needed to run VRF lite for IPv6 on a router? ()

題型:多項選擇題

Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()

題型:?jiǎn)雾?xiàng)選擇題

When a BGP router is not capable of understanding 4-byte AS numbers, it will see 4-byte AS numbers as a special, reserved, 2-byte AS number in the AS path. Which 2-byte AS number is this reserved one?()

題型:?jiǎn)雾?xiàng)選擇題

When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured, which parameter determines the winner?()

題型:?jiǎn)雾?xiàng)選擇題

For the following items,what is the mathematical relationship between the committed information  rate (CIR), committed burst (Bc), and committed rate measurement interval (Tc)?()

題型:?jiǎn)雾?xiàng)選擇題

What does a unicast prefix-based IPv6 multicast address start with?()

題型:?jiǎn)雾?xiàng)選擇題