A.BGP route-reflector should be in forwarding path of data coming from its clients
B.BGP route-reflector does not have to be in the forwarding path of data coming from its clients
C.BGP route-reflector will stop reflecting the routes if they’re not directly-connected clients
D.None of the above
您可能感興趣的試卷
你可能感興趣的試題
A.Failure detection
B.Failure reporting
C.IGP LSP/LSA originatio
D.Per-hop flooding time of new link state
E.Number of hops that need to be notified of new link state
A.MPLS LDP must be enabled.
B.BGP routing protocol must be running.
C.Named access-lists must be configured.
D.Symmetrical routing is required.
E.Domain name must be defined
A.Allows incoming TCP connections destined to port 179
B.Allows incoming TCP connections sourced from port 179
C.Allows incoming TCP connections from 1.1.1.1 and destined to，or sourced from port 179
D.Allows incoming TCP connections from 1.1.1.1 that are destined to port 179
E.Allows incoming TCP connections from 1.1.1.1 that are sourced from port 179
A.First （most significant ） octet is FF in hex
B.Starts with a prefix of FE80 to FEBF in hex
C.Starts with a prefix of FECO to FEFF in hex
D.Second octet contains a 4-bit multicast scope field
E.Last 64 bit contains the modified MAC address of the Ethernet interface
F.Is allocated from the unicast address space
A.port tunneling on the Ethernet subinterface
B.VLAN tunneling on the Ethernet trunk
C.port tunneling on the Ethernet interface
D.VLAN tunneling on the Ethernet VLAN subinterface
E.port tunneling on the Ethernet trunk
A.Tunnel label
B.VC-label
C.5-byte ATM header
D.Payload
E.4 byte ATM header
F.Support for 30 packed cells
A.In Anycast RP， two or more RPs are configured with the same IP address on loopback interfaces.
B.Anycast RP provides redundancy and load-sharing capabilities.
C.Routers with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip pim rp-address 1.1.1.1
D.Routers with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip rp-address pim 1.1.1.1
E.Routers with Anycast RP can be configured statically （loopback 1.1.1.1）with the command ip anycast-rp pim 1.1.1.1
A.PPP over Ethernet
B.Cisco Express forwarding
C.MPLS traffic Engineering
D.IS-IS routing
E.Unicast Reverse Path Forwarding（uRPF）
A.Version
B.Label
C.COS/EXP
D.TTL
E.S flag
A.It adds the VPN label into the top label in the MPLS label stack
B.It replaces the top label in the MPLS label stack with a VPN label and propagates
C.It replaces the bottom label in the MPLS label stack with a VPN label and propagates
D.It removes the top label in the MPLS label stack and does a Layer 3 lookup on underlying IP packets
E.None of above
最新試題
MPLS label mapping on an LSR is displayed by which IOS command？（）
Which option is not a valid method to assign the lowest-order 64-bit field of an IPv6 unicast address？（）
Which three things are the building blocks of the Cisco VPLS architecture？（）
Which three protocols use TLVs to carry attributes？（）
Assume that the PEs are separated by Multiple P routers.How many labels should the ingress PE push for BPE functionality？（）
Two islands of IPv6 networks that are running ISIS （IPv6 IGP） must be connected using a tunnel over anIPv4 network. Which tunneling method can be used to achieve this goal？（）
There are two cabling schemes to choose from when implementing a Cisco CRS-1 multishelf system：single-module cabling and multimodule cabling. What is the maximum capacity of the LCCs that aresupported in multimodule cabling？（）
Which tree of these are types of Ethernet Virtue Connections （EVCs） in the MEF concept？（）
Which three statements about MPLS traffic engineering （MPLS TE） are true？ （）
Which statement about multicast VPN is true？（）