多項選擇題Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()

A. Replace the straight-through cable with a crossover cable.
B. Change the subnet mask of the hosts to /25.
C. Change the subnet mask of the hosts to /26.
D. Change the address of Workstation A to 192.0.2.15.
E. Change the address of Workstation B to 192.0.2.111.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0?()

A.113.10.4.0
B.186.54.3.0
C.175.33.3.255
D.26.35.2.255
E.17.35.36.0

2.單項選擇題The network default gateway applying to a host by DHCP is 192.168.5.33/28.Which option is the valid IP address of this host?()

A.192.168.5.55
B.192.168.5.47
C.192.168.5.40
D.192.168.5.32
E.192.168.5.14

3.單項選擇題Cisco Catalyst switches CAT1 and CAT2 have a connection between them using ports FA0/13.An 802.1Q trunk is configured between the two switches.On CAT1,VLAN10 is chosen as native,but on CAT2 the native VLAN is not specified.What will happen in this scenario?()

A.802.1Q giants frames could saturate the link.
B.VLAN10 on CAT1 and VLAN1 on CAT2 will send untagged frames.
C.A native VLAN mismatch error message will appear.
D.VLAN10 on CAT1 and VLAN1 on CAT2 will send tagged frames.

4.單項選擇題Which command shows system hardware and software version information?()

A.show configuration
B.show environment
C.show inventory
D.show platform
E.show version

最新試題

After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()

題型:?jiǎn)雾?xiàng)選擇題

Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()

題型:?jiǎn)雾?xiàng)選擇題

A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?()

題型:?jiǎn)雾?xiàng)選擇題

What is the purpose of the cisco Vlan Trunking protocol?()

題型:?jiǎn)雾?xiàng)選擇題

Which pairing reflects a correct protocol-and-metric relationship?()

題型:?jiǎn)雾?xiàng)選擇題

Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?()

題型:?jiǎn)雾?xiàng)選擇題

Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?()

題型:?jiǎn)雾?xiàng)選擇題

What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?()

題型:?jiǎn)雾?xiàng)選擇題

What is the default administrative distance of OSPF?()

題型:?jiǎn)雾?xiàng)選擇題

A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?()

題型:?jiǎn)雾?xiàng)選擇題