A. collecting the running configuration
B. raising the logging level to meet the minimum requirement
C. discovering all devices by default
D. discovering devices using multiple user accounts as long as they are administrator-level accounts
E. using LLDP to discover network adaptors
您可能感興趣的試卷
你可能感興趣的試題
A. The interface configured as FEX fabric requires the MTU to be set to jumbo.
B. The service policy must be applied to the system QoS.
C. The device defaults to jumbo frame support； no changes are required.
D. The switchport in the FEX interface must be set to MTU 9216.
A. analyze traffic， device management， and network monitoring
B. DCNM-SAN， DCNM-LAN， and device manager
C. definition of flows， information collection， and data presentation
D. SNMP poll data， MIB analysis， and report generation
A. If none of the authentication servers that are configured for the current authentication mode responds to an authentication request， the DCNM-LAN server falls back to localauthentication.
B. DCNM-LAN only supports TACACS+.
C. Each DCNM-LAN server will have the same device credentials.
D. Administering DCNM-LAN authentication settings requires an authentication license.
E. DCNM-LAN server users are local to the DCNM-LAN server.
A. changing the default policy map from a default MTU of 1500 to 9216
B. using the command system jumbomtu 9216
C. using the command interface MTU 9216
D. configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map
A. two IP addresses， one for each supervisor
B. three IP addresses， one virtual IP and one physical IP for each supervisor
C. one IP address that is shared among supervisors
D. none—management 0 will use the IP address from the first SVI that is created
最新試題
Which are valid statements about Cisco Virtual Interface Card （VIC）？ （）
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
Refer to the exhibit.The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B （Path C）. Which actions might be used to change this behavior？（）
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）