A.Add two more FastEthernet interfaces.
B.Add a second router to handle the vlan traffic.
C.Use a hub to connect the four vlans with a FastEthernet interface on router.
D.Implement a router-on-a-stick configuration.
您可能感興趣的試卷
你可能感興趣的試題
A.The network administrator can apply port security to dynamic access ports
B.The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C.The sticky learning feature allows the addition of dynamically learned addresses to the runningconfiguration.
D.The network administrator can apply port security to EtherChannels.
E.When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
A.1~99
B.100~199
C.1300~1999
D.2000~2699
A.The switch must be configured with an IP address,subnet mask,and default gateway.
B.The switch must be connected to a router over a VLAN trunk.
C.The switch must be reachable through a port connected to its management VLAN.
D.The switch console port must be connected to the Ethernet LAN.
E.The switch management VLAN must be created and have a membership of at least one switch port.
F.The switch must be fully configured as an SNMP agent.
A.使用策略控制來結合認證、用戶接入和管理員接入對接入安全性進行擴展
B.提供更大的靈活性和機動性、增強的安全性以及用戶生產力增益
C.對所有用戶采用統一的安全策略
D.減少在擴展用戶和管理員對網絡的接入時所需的管理性和運營負擔
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()
A.The new IOS image is too large for the router flash memory.
B.The TFTP server is unreachable from the router.
C.The new IOS image is not correct for this router platform.
D.The IOS image on the TFTP server is corrupt.
E.There is not enough disk space on the TFTP server for the IOS image.
最新試題
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()