單項選擇題Which component of VPN technology ensures that data can be read only by its intended recipient?()

A.data integrity
B.encryption
C.key exchange
D.authentication


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題What will happen if a private IP address is assigned to a public interface connected to an ISP?()

A.Addresses in a private range will be not routed on the Internet backbone.
B.Only the ISP router will have the capability to access the public network.
C.The NAT process will be used to translate this address in a valid IP address.
D.Several automated methods will be necessary on the private network.
E.A conflict of IP addresses happens, because other public routers can use the same range.

2.多項選擇題提高密碼的安全性,應進行如下配置()

A.設置最短密碼長度
B.關閉無用連接
C.加密配置文件中的所有密碼
D.設置密碼有效期

3.單項選擇題Host 1 sends a request for a file to remote sever1. Which destination address does Host 1 place f the packet containing the request()。

A.The Mac address of the NIC in Sever1
B.The IP address of Server 1.
C.The MAC address of the s0/0/0 interface of router R2
D.The IP address of the s0/0/0 interface of router R1
E.The IP address of the Fa0/0 interface of router R1

4.多項選擇題Which two commands correctly verify whether port security has been configured on portFastEthernet 0/12on a switch?()

A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1# show swithport port-secure interface FastEthernet 0/12
C.SW1# show port-secure interface FastEthernet 0/12
D.SW1#show running-config

5.單項選擇題Which IP address can be assigned to an Internet interface?()

A.10.180.48.224
B.9.255.255.10
C.192.168.20.223
D.172.16.200.18

最新試題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:?jiǎn)雾?xiàng)選擇題

在Cisco IOS 設備中,啟動配置文件存儲于何處?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:?jiǎn)雾?xiàng)選擇題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()

題型:?jiǎn)雾?xiàng)選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:?jiǎn)雾?xiàng)選擇題