單項選擇題How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates？（）

A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題Acknowledgements, sequencing, and flow control are characteristics of which OSI layer（）。

A.Layer2
B.Layer3
C.Layer4
D.Layer5
E.Layer6
F.Layer7

3.單項選擇題When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link（）。

A.By default, all defined VLANs are allowed on the trunk.
B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.
C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.
D.Each single VLAN, or VLAN range, must be specified with the vlan database command.

4.單項選擇題What is one benefit of PVST+?（）

A.PVST+reduces the CPU cycles for all the switches in the network
B.PVST+automatically selects the root bridge location,to provide optimiz…
C.PVST+allow the root switch location to be optimized per vlan.
D.PVST+supports Layer 3 load balancing without loops.

5.單項選擇題When a router is connected to a Frame Relay WAN link using a serial DTE interface, how is the interface clock rate determined（）。

A.It is supplied by the CSU/DSU.
B.It is supplied by the far end router.
C.It is determined by the clock rate command.
D.It is supplied by the Layer 1 bit stream timing.

最新試題

以下哪兩種介質可提供高達1Gb/s 的帶寬？（）

題型：多項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍？（）

題型：?jiǎn)雾?xiàng)選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。下列哪組設備僅包含中間設備？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺路由器（其路由表如圖所示）收到發往192.168.1.4的數據包。路由器將如何處理該數據包？（）

題型：?jiǎn)雾?xiàng)選擇題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求，正確的目的套接字?jǐn)?shù)字是什么？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口？（）

題型：?jiǎn)雾?xiàng)選擇題